System information

1.6.8
1.6.9
Whenever a regeneration has been completed the APU must complete a 2 minute
cool down cycle before being turned off. If the ON/OFF button is pres sed during
this time the APU will shut down after the cool down period has been completed.
If the ON/OFF button is pressed for 5 seconds the APU will shut down
immediately.
Main Engine Interlock
If your APU is equipped with the optional main engine interlock feature it will
normally not operate when the truck engine is running. However, during
regeneration cycles and in the Regen Soon state the interlock feature is
disabled and the APU/DPF system will complete the regeneration even if the
truck engine is started. When the regeneration is complete the APU interlock
feature will be enabled and the APU will shut down if the truck engine
is running.
Engine Oil Consumption and Filling
Excessive oil consumption will cause the filter to plug up sooner than
expected. If the engine consumes more than one quart of oil in 200 hours of
operation, it requires maintenance.
NOTICE
When filling the oil on the engine,
DO NOT OVERFILL. The oil level
should not be above the "FULL" line.
6
CLEARSKY COMFORTPRO DPF (PG1050 & PG1060) OPERATION & USERS MANUAL