Owner's Manual

OnGuard v1.1 Integration Carrier Proprietary and Confidential ©2022 Carrier.
for v8.0 or later systems All rights reserved.
6
To track occupancy through the security system, you must define one or more zones.
NOTE For the purpose of this integration, a zone is a geographical area for which occupancy can be detected
through the activity of its associated badge readers.
Adding a zone
1 On the Occupancy tab, enter a unique name for the new zone in the Add New Zone field.
2 Press
Enter to add the new zone – it appears in the list of zones below.
NOTE To remove a zone from the list, click the Delete ( ) button to the right of the zone name.
Setting zone properties
1 On the Occupancy tab, click the zone you wish to configure in the Zone list.
2 Click
Config in the Occupancy panel.
3 Select a value for the
Full Occupancy Count lertethe zone.
The zone is considered fully occupied when the occupancy count reaches this number.
4 Enter a time for the
Reset Time.
The occupancy count is automatically cleared at this time each day to ensure that each day’s occupancy
tracking does not accumulate errors from the day before.
NOTE If the add-on is shut down at any time, the last known occupancy count is retained.
Exporting and clearing the prediction history
Prediction history can be exported to a .csv file which is named after a selected zone. Exporting the prediction
history purges all but the most recent 30 entries from the
Prediction History panel.
On the Scheduling tab, select the desired zone, then click the Export Predictions button in the Prediction History
panel.
Setting up the Data Connector add-on