Owner's Manual

OnGuard v1.1 Integration Carrier Proprietary and Confidential ©2022 Carrier.
for v8.0 or later systems All rights reserved.
5
1 On the
Server Configuration tab, enter the OnGuard Connector settings. See table below.
2 To allow a Self Signed Certificate, check the checkbox.
Note: Choosing this option will result in a less secure
configuration, therefore should only be chosen when you are unable to use a certificate signed by a certificate
authority.
NOTE Status indicates Connected if configured properly. If errors occurred, view the Activity Log (to the right) to
help diagnose what may be preventing the connection from being established.
Field
Notes
Host
The Building Integration Platform server IP address.
Port
Port number for the Building Integration Platform service.
OAuth Host
IP address of the server that the Building Integration Platform OAuth service is
running on.
OAuth Port
Port number for the Building Integration Platform OAuth service.
Client ID
Client ID of the Building Integration Platform Resource associated with this
integration.
Password
Client Password of the Building Integration Platform Resource associated with
this integration.
NOTE You must configure your Lenel® OnGuard system with the System Name "OnGuard". You can edit this field
in the Building Integration Platform's
System Configuration tab.
Configuring the Server