Owner's Manual

BIP installation and configuration details

To enable communication between the WebCTRL and OnGuard servers, the Building Integration Platform (BIP)

must be installed on a server that can connect to both application servers. Refer to the following documents to

install and configure the BIP:

• Building Integration Platform Installation Guidelines

• Building Integration Platform Commissioning User Manual

The BIP is designed to support multiple integrations. This section describes the steps needed specifically for the

OnGuard Integration.

BIP Installation

See the Building Integration Platform Components section of the BIP Installation Manual for which BIP services

must be installed for the OnGuard Integration. Follow the instructions in that document to install each of the

indicated services.

BIP Configuration

Refer to the BIP Commissioning User Manual to perform the following steps:

1 Refer to the BIP Commissioning Access section to log in as the default web admin user using the default

credentials, then change the password for the default web admin user.

2 To set up additional web admin users:

a) If the new user will not be authenticated with Active Directory or Single Sign-On, refer to the Local

Database User Creation section to create the user in the BIP database.

b) Refer to the User Management section to register the user with the role Admin with Web Login.

3 Register your Lenel-OnGuard System

a) Refer to the System Configuration > Add System Configuration section to add a system. Select "Lenel-

OnGuard" as your

System Type.

b) Refer to the Register Lenel-OnGuard System sub-section to complete the registration.

4 The Configuring the Server section of this document explains how to connect to a BIP Resource. Refer to the

Resource Registration > Add Resource section to create a BIP Resource for this purpose with:

a) Resource IDs: aaa, dipservice

Grant Type: service

c) Scopes: read, write

d) Access Token Time: 1 month