Owner's Manual

Adding Zone Mapping

Map the equipment files to the zones to receive OnGuard® events. Once the Zone Mapping is set up, any mapped

OnGuard® events will be written to the mapped BV microblocks in the mapped Equipment file.

1 On the

Alarms tab, click OnGuard to i-Vu Pro.

2 Click the

Edit Zones button to open the Zone Map and Equipment panels.

3 Drag the equipment from the

Equipment panel to the desired zone in the Zone Map panel.

NOTE To delete a zone's association with a piece of equipment, click the Delete ( ) button to the right of the

zone.

Exporting Zone Mapping

You can export a JSON configuration file that contains the current

OnGuard to i-Vu Pro Events and Zones to be

used with Snap to build equipment for the selected Alarm Mappings.

1 On the

Alarms tab, click OnGuard to i-Vu Pro.

2 Click on the Export ( ) button to download the current configuration file; this downloads an

onguardmapping.json file.

Adding Alarm Manager Points to an equipment file

The JSON configuration file can be used in the Snap application to add the mapped points to an equipment file.

To add Snap Script to the Snap application:

1 In the Snap application add the "Scripts plug-in" (refer to Snap Help for this step).

2 In Snap select Tools>Scripts>Configure, then click Add.

3 Select the alarm-manager.logic-script from the onguard-integration.zip file.

4 Click

Ok.

To add Snap Symbols:

1 Create a folder called "onguard_integration_helper" inside of <your_system_name>\extras\tools.

2 Select the onguardalarms.logic-symbol file from the onguard-integration.zip file; then move the file into the

onguard_integration_helper folder created above.