Manualshelf

Owner`s manual

ManualsBrandsCarrier ManualsConsumer electronicsNon-Programmable Thermostats
12345678910
8
OPERATING THE THERMOSTAT
Setting the temperatures for heating and cooling
Your thermostat is installed with the heating set at 68° F and the cooling set at
72° F. You can use these or change them so your home is as warm or as cool as
you would like it to be. These steps will hold the temperature where you set it.
1. To change the heating temperature, press the mode
button on the left until the screen says heat.
2. Press the up or down button located on the right side of
the display until you reach the desired temperature.
3. To change the cooling temperature, press the mode
button on the left until the screen says cool.
4. 4. Press the up or down button located on the right side of the display
until you reach the desired temperature.