KSAIF0401AAA Wi-Fi Interface Kit for Ductless Systems INSTALLATION INSTRUCTIONS NOTE: Read and become familiar with these instructions before beginning installation. TABLE OF CONTENTS PAGE SAFETY CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 WIRING SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PARTS LIST .
SAFETY CONSIDERATIONS Installing, starting up, and servicing air−conditioning equipment can be hazardous due to system pressures, electrical components, and equipment location (roofs, elevated structures, etc.). Only trained, qualified installers and service mechanics should install, start−up, and service this equipment. Untrained personnel can perform basic maintenance functions such as cleaning coils. All other operations should be performed by trained service personnel.
! WARNING ELECTRICAL SHOCK HAZARD Failure to follow this warning could result in personal injury or death. Before installing, modifying, or servicing system, main electrical disconnect switch must be in the OFF position. There may be more than 1 disconnect switch. Lock out and tag switch with a suitable warning label. ! WARNING EXPLOSION HAZARD Failure to follow this warning could result in death, serious personal injury, and/or property damage.
OVERVIEW The Wi−Fi Interface kit KSAIF0401AAA for Cassette, Ducted, Console Heat Pump and downloadable APP are used to allow a mobile device to become the controller for a ductless system. WIRING SPECIFICATIONS All wiring required to install and commission the Wi−Fi kits are provided with the kit or are already present inside the fan coils. NOTE: Not compatible with console sizes 09 and 12.
PARTS LIST Kit Contents: Confirm that all the following parts are included. Table 1—Parts List No. Name Qty 1 Wi-Fi Interface kit KSAIF0401AAA 1 N/A Remarks 2 Installation and owner's manual 1 N/A 3 Screws 3 M4X20 (to mount on the wall) 4 Wall plugs 3 To mount on the wall 5 USB Wi-Fi dongle 1 N/A 6 Extension Cord 19 ft (6m) 1 See Fig. 4 7 Wireless Remote control 1 N/A Table 2—Field Supplied Components: Prepare the following assemblies on site No.
CONTROLLER DIMENSIONS AND WIRING DIAGRAM 1.45 in. (36.8mm) ) m 2m . (6 in 1.8 in. (46 mm) mm 4 2.4 ) 20 (1 in. 4.7 1.8 in. (46 mm) 2.44 in. (62 mm) Fig.
INSTALLATION LOCATION DO NOT install the Wi−Fi kit inside a metal enclosure. The Wi−Fi kit does not need to be installed in the occupied space. For wood stud buildings, it is acceptable to install the Wi−Fi kit in an unconditioned attic or an air conditioned closet. In the event of a metal stud building, install the Wi−Fi kit inside the conditioned space in a discrete location as agreed to with the home owner or property manager. ! CAUTION The Wi−Fi kit is designed for indoor use only.
INSTALLATION 1. Remove power from the indoor unit. 2. Obtain access to the PCB control board of the indoor unit removing the control box cover. 3. Remove the mounting plate from the Wi−Fi translator PCB by inserting a standard flat screwdriver into the slots in the lower part of the translator. Fig. 3 - Removing upper part of Wi−Fi Translator 4. Connect the provided 4 core shielded wire.
5. Insert the Wi−Fi dongle into the female USB port with the QR code visible (see Fig. 5). Fig. 5 - Insert Wi−Fi Dongle on USB Port Fig.
6. Mount the back plate to a wall or stable stationary surface using the field supplied screws. Fig. 7 - Mount the back plate to a wall 7. Install the wiring to the indoor unit following one of the options listed below: a. For exposed mounting, there are two outlet positions. Top side wire outlet Bottom side wire outlet Fig.
b. For through the wall wiring: Wiring through the wall Wiring hole and wall hole Diameter of wall hole: .79 in (20mm) Fig. 9 - Through the wall wiring NOTE: Avoid the water entering into the Wi−Fi Kit, using a trap and a putty to seal the connectors of wires during wiring installation Putty Trap Putty Trap Fig.
8. Reattach the upper part of the Wi−Fi translator to the back plate. After re−attaching the upper part avoid clamping the wiring during installation. Fig. 11 - Reattaching the upper part of the Wi−Fi translator 9. Re−install the control box cover on the indoor unit. 10. Power up the system 11. Using the supplied Wireless Remote controller, set the unit in AP mode pointing it out to the Infrared receiver of the indoor unit.
INSTALLATION METHOD FOR THE WIRED CONTROLLER (OPTIONAL) 1. Remove the top cover from the body of the Wi−Fi Translator by inserting a small standard screw driver in the slit at the bottom of body and twisting. 2. Use the connective cable to connect the wire controller to CN3 of the Wi−Fi translator PCB. NOTE: Refer to the wired controller manual for details. Fig. 12 - Connect the wired controller C N3 Extension cord wire controller smart port 4-core shielding wire The connective wires group-2 Fig.
Table 3—Specifications Model KSAIF0401AAA Standard IEEE802.11b/g/n Antenna Type External Omni Directional Antenna Frequency WI-FI:2.4G Maximum Transmitted Power 15 dBm Max Operation Temperature 32F~113F (0C~45C) Operation Humidity 10%~85% Power Input DC 5V/300mA Copyright 2018 CAC / BDP S 7310 W. Morris St. S Indianapolis, IN 46231 Edition Date: 07/18 Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
KSAIF0401AAA Wi-Fi Interface Kit for Ductless Systems INSTALLATION INSTRUCTIONS NOTE: Read and become familiar with these instructions before beginning installation. TABLE OF CONTENTS PAGE SAFETY CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 WIRING SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PARTS LIST .
SAFETY CONSIDERATIONS Installing, starting up, and servicing air−conditioning equipment can be hazardous due to system pressures, electrical components, and equipment location (roofs, elevated structures, etc.). Only trained, qualified installers and service mechanics should install, start−up, and service this equipment. Untrained personnel can perform basic maintenance functions such as cleaning coils. All other operations should be performed by trained service personnel.
! WARNING ELECTRICAL SHOCK HAZARD Failure to follow this warning could result in personal injury or death. Before installing, modifying, or servicing system, main electrical disconnect switch must be in the OFF position. There may be more than 1 disconnect switch. Lock out and tag switch with a suitable warning label. ! WARNING EXPLOSION HAZARD Failure to follow this warning could result in death, serious personal injury, and/or property damage.
OVERVIEW The Wi−Fi Interface kit KSAIF0401AAA for Cassette, Ducted, Console Heat Pump and downloadable APP are used to allow a mobile device to become the controller for a ductless system. WIRING SPECIFICATIONS All wiring required to install and commission the Wi−Fi kits are provided with the kit or are already present inside the fan coils. NOTE: Not compatible with console sizes 09 and 12.
PARTS LIST Kit Contents: Confirm that all the following parts are included. Table 4—Parts List No. Name Qty 1 Wi-Fi Interface kit KSAIF0401AAA 1 N/A Remarks 2 Installation and owner's manual 1 N/A 3 Screws 3 M4X20 (to mount on the wall) 4 Wall plugs 3 To mount on the wall 5 USB Wi-Fi dongle 1 N/A 6 Extension Cord 19 ft (6m) 1 See Fig. 17 7 Wireless Remote control 1 N/A Table 5—Field Supplied Components: Prepare the following assemblies on site No.
CONTROLLER DIMENSIONS AND WIRING DIAGRAM 1.45 in. (36.8mm) ) m 2m . (6 in 1.8 in. (46 mm) mm 4 2.4 ) 20 (1 in. 4.7 1.8 in. (46 mm) 2.44 in. (62 mm) Fig.
INSTALLATION LOCATION DO NOT install the Wi−Fi kit inside a metal enclosure. The Wi−Fi kit does not need to be installed in the occupied space. For wood stud buildings, it is acceptable to install the Wi−Fi kit in an unconditioned attic or an air conditioned closet. In the event of a metal stud building, install the Wi−Fi kit inside the conditioned space in a discrete location as agreed to with the home owner or property manager. ! CAUTION The Wi−Fi kit is designed for indoor use only.
INSTALLATION 3. Remove power from the indoor unit. 4. Obtain access to the PCB control board of the indoor unit removing the control box cover. 5. Remove the mounting plate from the Wi−Fi translator PCB by inserting a standard flat screwdriver into the slots in the lower part of the translator. Fig. 16 - Removing upper part of Wi−Fi Translator 6. Connect the provided 4 core shielded wire.
7. Insert the Wi−Fi dongle into the female USB port with the QR code visible (see Fig. 18). Fig. 18 - Insert Wi−Fi Dongle on USB Port Fig.
8. Mount the back plate to a wall or stable stationary surface using the field supplied screws. Fig. 20 - Mount the back plate to a wall 9. Install the wiring to the indoor unit following one of the options listed below: c. For exposed mounting, there are two outlet positions. Top side wire outlet Bottom side wire outlet Fig.
d. For through the wall wiring: Wiring through the wall Wiring hole and wall hole Diameter of wall hole: .79 in (20mm) Fig. 22 - Through the wall wiring NOTE: Avoid the water entering into the Wi−Fi Kit, using a trap and a putty to seal the connectors of wires during wiring installation Putty Trap Putty Trap Fig.
10. Reattach the upper part of the Wi−Fi translator to the back plate. After re−attaching the upper part avoid clamping the wiring during installation. Fig. 24 - Reattaching the upper part of the Wi−Fi translator 11. Re−install the control box cover on the indoor unit. 12. Power up the system 13. Using the supplied Wireless Remote controller, set the unit in AP mode pointing it out to the Infrared receiver of the indoor unit.
INSTALLATION METHOD FOR THE WIRED CONTROLLER (OPTIONAL) 1. Remove the top cover from the body of the Wi−Fi Translator by inserting a small standard screw driver in the slit at the bottom of body and twisting. 2. Use the connective cable to connect the wire controller to CN3 of the Wi−Fi translator PCB. NOTE: Refer to the wired controller manual for details. Fig. 25 - Connect the wired controller C N3 Extension cord wire controller smart port 4-core shielding wire The connective wires group-2 Fig.
Table 6—Specifications Model KSAIF0401AAA Standard IEEE802.11b/g/n Antenna Type External Omni Directional Antenna Frequency WI-FI:2.4G Maximum Transmitted Power 15 dBm Max Operation Temperature 32F~113F (0C~45C) Operation Humidity 10%~85% Power Input DC 5V/300mA Copyright 2018 CAC / BDP S 7310 W. Morris St. S Indianapolis, IN 46231 Edition Date: 07/18 Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
