User Guide
Table Of Contents
8
ANDROID CONFIGURATION PROCESS
1. Ensure your mobile device has already been connected to the desired Wi−Fi network.
It is recommended to forget all networks except the one used to connect the fan coil to
prevent configuration errors.
2. Disconnect the power supply from the Ductless system and wait thirty (30) seconds.
3. Reconnect the power supply to the Ductless system.
4. Press LED or DO NOT DISTURB button on the wireless remote seven (7) times in
three (3) minutes. When the display shows ’AP’, the Ductless system is ready for
network configuration.
5. When the display shows ’AP’, the Ductless system is ready for network configuration.
IMPORTANT: The ducted, cassette, and floor console displays will not show ’AP’ during
network configuration.
6. On your Android device, open the Carrier Climate, Bryant ControlBox, Payne
Panel, or Midea Air App, and select Add Device.
Fig. 2 - Add Device Function