User Guide

31
TURBO − TURBO is only available after the COOL mode is selected. TURBO is
designed to decrease the time it takes for the space to achieve setpoint by triggering the
compressor and fan to immediately move to the high speed.
Lover Controls − the app provides 2 different louver controls, horizontal ( ) and
vertical control ( ). The use of these functions are dependent on the type of fan coil
currently installed and if it has a vertical and/or horizontal louver control. When
available, these buttons allow the user to adjust the direction of air flow from the
motorized high wall veins.
ECO Mode − ECO mode is available only after the ductless system is set to the COOL
mode. This mode reduces the energy consumption of the ductless system up to 60% by
slowing the compressor and reducing the maximum capacity output. This mode remains
active for 8 hrs and then the system returns to the normal operating mode.
NOTE: While in this mode, the system may not obtain the setpoint if there is a large
thermal load on the space.
Unit of Measure − By default, the app comes set to use _F for the temperature unit of
measure. Press (the soft button) and the unit of measure changes to _C. If pressed
again, the unit of measure returns to _F.
Special Functions − The special functions available in the app include TIMER ON,
TIMER OFF, 14_F (8_C) HEAT SETBACK, SLEEP, SYSTEM CHECK.