User Guide

12
iOS CONFIGURATION PROCESS
1. Ensure your mobile device has already been connected to the Wi−Fi network which
you want to use. It is recommended to forget all networks except the one used to
connect the fan coil to prevent configuration errors.
2. Disconnect the power supply from the Ductless system and wait thirty (30) seconds.
3. Reconnect the power supply to the Ductless system.
4. Press LED or DO NOT DISTURB seven (7) times in 3 minutes. When the display
shows ’AP’, the Ductless system is ready for network configuration.
5. When the display shows ’AP’, the Ductless system is ready for network configuration.
IMPORTANT: The ducted, cassette, and floor console displays will not show ’AP’
during network configuration.
6. On your iOS device, open the Carrier CliMate, Bryant ControlBox, Payne Panel, or
Midea Air App, and select Add Device.
Fig. 6 - Add Device