Install Instructions

ManualsBrandsCarrier ManualsHVAC Replacement PartsWi-Fi Interface Kit for Ductless Systems

1

2

3

4

5

6

7

8

9

Table Of Contents

9

6. Install the USB intermediate cable by connecting the white JST connector into

terminal CN3 on the display board and route the wires (see Figure 4).

Fig. 4 - Connect the JST connector

7. Insert the Wi−Fi dongle into the black female USB port.

8. Once the wiring is complete, reassemble the high wall cover.

9. Turn on power to the high wall.

10. Complete the app setup instructions found in the Owner’s Manual.