User Manual

ADVANCED SETUP 34
Unoccupied Settings
UNOCCUPIED operation allows you to select maximum and mini-
mum temperatures, humidity levels, fan speed and ventilator speed
for times when your home will be unoccupied for a designated peri-
od of time. These settings will apply to all zones when activated.
1 Flip down the door near the base of the Infinity
™
Control.
2 Press the ADVANCED setup button to view 1st ADVANCED
setup display (1 of 7).
3 Press the LEFT button twice to select the UNOCCUPIED display
(6 of 7).
4 Use the TEMP (+\-) button to set your MAX TEMPERATURE.
5 Press DOWN on the SCROLL button to highlight MIN TEMPERA-
TURE.
6 Use the TEMP (+\-) button to select MIN TEMPERA TURE.
7 Press DOWN on the SCROLL button to highlight MAX HUMIDITY.
8 Use the TEMP (+\-) button to set MAX HUMIDITY.
9 Press DOWN on the SCROLL button to highlight MIN HUMIDITY.
10 Use the TEMP (+\-) button to select MIN HUMIDITY.
11 Press DOWN on the SCROLL button to highlight FAN mode.
Use the TEMP (+\-) button to select FAN mode: LOW, MED,
HIGH or AUTO.
12 Press DOWN on the SCROLL button to highlight VENTILATOR
mode. Use the TEMP (+\-) button to select VENTILATOR mode:
LOW, MED, HIGH OR AUTO.
13 To exit, press ADVANCED or simply close the door.
NOTE: You can exit at any time. When exiting, you will be
prompted to save changes if you have made any. Select “YES”
ADVANCED SETUP 34