Owner's Manual

heatismanuallyactivatedbypressingthereadHEATbuttonfor
fourseconds.ToactivateEmergencyHeat,presstheredHEAT
buttonforfourseconds.Ifyoursystemisaheatpumpwith
electricheat,thenthedisplaywillshowthethreechoices:
SYSTEMINCONTROL(thesystemwillchoosethetypeand
amountofheatneededforconditions)
HEATPUMPONLY(onlytheheatpumpwillbeusedforheating)
ELECTRICHEATONLY(onlyelectricheatwillbeusedfor
heating)
IfyoursystemisaHybridHeatTM system (heat pump with gas or
oil furnace), then the display will show the three choices:
HYBRID HEAT TM (the system will choose the type and amount of
heat needed for conditions)
FURNACE ONLY (only the furnace will be used for heating)
HEAT PUMP ONLY (only the heat pump will be used for heating)
Scroll the highlight to your choice using the scroll button under
the door, then press the left side button to save your selection
and exit.
To deactivate Emergency Heat, press the red HEAT button for four
seconds and choose SYSTEM IN CONTROL or HYBRID HEAT,
depending on your type of heating equipment.
Cooling
To select cooling, press the blue COOL button.
Cooling is confirmed when the blue LED adja-
cent to the blue COOL button is lit. Cooling is
operating when the blue LED is gradually puls-
ing on and off. (The LEDs can be turned off.
For details, see ADVANCED SETUP - LIGHT-
OUTSIDE: 65 ° I FAN:AUTO
71°
ACTUAL TEMPERATURE
D w. _-
PERIOD: COOL AT
DA_ 75 °