Specifications

25
Table 3 — ICVC Display Data (cont)
EXAMPLE 6 — POWER DISPLAY SCREEN
To access this display from the ICVC default screen:
1. Press .
2. Press .
3. Scroll down to highlight .
4. Press .
NOTE: All variables with CAPITAL LETTER point names are available for CCN read operation.
MENU
STATUS
POWER
SELECT
DESCRIPTION STATUS UNITS POINT
Percent Line Current 0-999 % LNAMPS_P
Average Line Current 0-99999 AMPS LNAMPS_A
Percent Line Voltage 0-999 % LNVOLT_P
Average Line Voltage 0-99999 VOLTS LNVOLT_A
Line Power Factor 0.0-2.0 LINE_PF
Line Kilowatts 0-99999 KW LINE_KW
Percent Line Kilowatts
0-99999
%
LINEKW_P
Percent Load Current
0-99999
%
LDAMPS_P
Average Load Current 0-99999 AMPS LDAMPS_A
Motor Power Factor 0.0-2.0 MOTOR_PF
Motor Kilowatts 0-99999 KW MOTOR_KW
Percent Motor Kilowatts
0-99999
%
MOTORKWP
Motor Kilowatt-Hours 0-99999 KWH MOTORKWH
Demand Kilowatts 0-99999 KW DEM_KW
Line Current Phase 1 (R) 0-99999 AMPS LN_AMPS1
Line Current Phase 2 (S) 0-99999 AMPS LN_AMPS2
Line Current Phase 3 (T) 0-99999 AMPS LN_AMPS3
Load Current Phase 1 (U) 0-99999 AMPS LD_AMPS1
Load Current Phase 2 (V) 0-99999 AMPS LD_AMPS2
Load Current Phase 3 (W) 0-99999 AMPS LD_AMPS3
Line Voltage Phase 1 (RS) 0-99999 VOLTS LN_VOLT1
Line Voltage Phase 2 (ST) 0-99999 VOLTS LN_VOLT2
Line Voltage Phase 3 (TR) 0-99999 VOLTS LN_VOLT3
Ground Fault Current 0-999 AMPS GF_AMPS
Line Frequency 0-99 HZ LINEFREQ
Rectifier Overload
0-100
%
RECT_OV
Inverter Overload
0-100
%
INV_OV
Motor Overload
0-100
%
MOTOR_OV
Line Current Imbalance
0-100
%
LN_IMB_I
Motor Current Imbalance
0-100
%
MT_IMB_I
Line Voltage Imbalance
0-100
%
LN_IMB_V
Line Active Current 0-99999 AMPS AMPS_ACT
Line Reactive Current 0-99999 AMPS AMPS_RE
Line Active Voltage 0-99999 VOLTS VOLT_ACT
Line Reactive Voltage 0-99999 VOLTS VOLT_RE
DC Bus Voltage Reference 0-99999 VOLTS BUS_REF
DC Bus Voltage 0-99999 VOLTS BUS_VOLT
Flux Current 0-99999 AMPS FLUXAMPS
Torque Current 0-99999 AMPS TORQAMPS
Inverter Temperature 0-300 ° F (° C) INV_TEMP
Rectifier Temperature 0-300 ° F (° C) REC_TEMP
VFD Enclosure Temperature 0-300 ° F (° C) VFD_ENCL
VFD Cold Plate Temperature 0-300 ° F (° C) CP_TEMP
Humidity Sensor Input 0.0-5.0 VOLTS HUMID_SR
Relative Humidity
0-100
%
HUMIDITY
VFD Coolant Flow
0-100
%
VFD_FOUT
Actual VFD Speed
0-100
%
VFD_ACT
Comp Motor RPM 0-300000 RPM CPR_RPM
Comp Motor Frequency 0-10000 Hz VFD_FREQ
Comp Maximum Speed 0-101 Hz MAXSPEED
Comp Minimum Speed 0-100 % MINSPEED