Specifications

21
TIME SCHEDULE OPERATION (Fig. 20)
1. On the Menu screen, press .
2. Press or to highlight the de-
sired schedule.
OCCPC01S — LOCAL Time Schedule
OCCPC02S — ICE Build Schedule
OCCPC03S — CCN Time Schedule
3. Press to view the desired time schedule.
4. Press or to highlight the de-
sired period or override to change.
5. Press to access the highlighted period or
override.
6. a Press or to change the
time values. Override values are in one-hour
increments, up to 4 hours.
b. Press to select days in the day-of-week
fields. Press to eliminate days from the
period.
7. Press to register the values and to move hori-
zontally (left to right) within a period.
8. Press to leave the period or override.
9. Either return to Step 4 to select another period or over-
ride, or press again to leave the current time
schedule screen and save the changes.
10. The Holiday Designation (HOLIDAYS table) may be
found in the Service Operation section, page 45. The
month, day, and duration for the holiday must be
assigned. The TIME BROADCAST ENABLE func-
tion in the BRODEF screen also must be enabled for
holiday periods to function.
TO VIEW AND CHANGE SET POINTS (Fig. 21)
1. To view the SETPOINT table, from the MENU screen
press .
SCHEDULE
NEXT
PREVIOUS
SELECT
NEXT
PREVIOUS
SELECT
INCREASE
DECREASE
23XRPIC3
Fig. 20 — Example of Time Schedule
Operation Screen
a23-1606
ENABLE
DISABLE
ENTER
EXIT
EXIT
SETPOINT
23XRPIC3
SETPOINT SELECT
SETPOINT
Base Demand Limit
Control Point Source
LCL Setpoint
ECL Setpoint
Ice Build Setpoint
Tower Fan High Setpoint
100%
50.0 °F
60.0 °F
40.0 °F
75 °F
Fig. 21 — Example of Set Point Screen
a23-1607