Owner`s manual

ADVANCED PROGRAMMING OPTIONS

Clearing the reset reminders

The thermostat tells you when it’s time to change the UV light in the evaporator

coil box connected to the furnace (if equipped), humidifier pad (if equipped),

and furnace filter. (See page 47 for more information.) When the reminder icons

are displayed on the screen, pressing and holding the done button for about

three seconds clears all reminders on the screen. This might not be the best

option when you have multiple reminders but have done only one of the tasks.

This option lets you reset the reminders individually.

1. Open the door.

2. Press and hold the buttons underneath the heat

and cool setpoints simultaneously (the two bottom

buttons on the right). The screen will display 01 and up

to three reset reminders, as enabled by your installer.

One of the reminders will flash; the display will show

the percentage of time used by that reminder item.

3. Repeatedly press the set button until the reminder you

want to clear flashes.

4. Press and hold the done button for about three seconds to remove the

reminder. The percentage associated with it will go down to zero.