Owner`s manual

22
PROGRAMMING THE THERMOSTAT
5. Set the cooling temperature for that time period by
pressing the button under the cool set at:
temperature on the right and then pressing the up or
down button until you reach the desired cooling
temperature.
6. Repeat this process for each of the three remaining time
periods for Monday – day, evening and sleep – by first
pressing the button under the four time periods to
select the time period with the arrow. To change the start
at time, press the button under the time, then press
the up or down button, stopping on the desired time. To
set the heating temperature, press the button under
heat set at:, then press the up and down button,
stopping on the desired temperature. To set the cooling
temperature, press the button under cool set at:, then
press the up or down button, stopping on the desired
temperature.
7. Press the done button on the right when you’ve
completed the process.
8. Close the door.