Container Refrigeration Unit Operating Instructions

3-1662-02575-07
Custom Controller Configuration
Allows the user to change the selectable configuration variables and save those values into a new configuration model.
The following screen is displayed when this option i s chosen.
The following is a summary of the options available in Custom Controller Configuration.
<D> Dehumidification -- Allows the user to configure or not configure the controller with a dehumidification device.
<I> Defrost Interval Save -- Allows the user to save or not save the defrost interval.
<V> Advance Pre--trip -- Allows the user to set the advanced pre--trip test to AUTO 1 (i.e., NO) or AUTO2 (i.e., YES).
<T> Suction Temperature Sensor -- Allows the user to configure or not configure the controller with a suction
temperature sensor.
<M> Economy Mode -- Allows the user to set the custom economy mode.
<A> Arctic Mode -- Allows the user to enable/disable the arctic mode.
<B> Bulb Mode -- Allows the user to enable/disable the bulb m ode.
<C> DischargePressure Sensor -- Allows the user to configure or not configure the controller with a dischargepressure
sensor. This is an Micro-Link 2i Controller variable only.
<P> Probe Check Logic -- Allows the user to set the probe check logic to standard or special. This is an Micro-Link 2i
Controller variable only.
<F> Snap Freeze -- Allowsthe user to enable/disable the snap freeze. This is an Micro-Link2i Controller variable only.
<U> Suction Pressure Sensor -- Allows the user t o configure or not configure the controller with a suction pressure
sensor. This is an Micro-Link 2i Controller variable only.
<G> Degree C Lockup -- Allows the user to configure or not configure the controller with degree C lockout. This is an
Micro-Link 2i Controller variable only.
<S> Save -- Allows the user to save the configuration variable values. Upon pressing the “S” key, the user is allowed to
enter up to 14 characters for the custom configuration name. Upon accepting the new name, the configuration i s saved
in the custom.cnf file. The new name will be displayed in the available configurations on the controller configuration
screen.