Specifications

INDEX
Alarm Description, 41
Alarm Options, 41
Alarm Routing Control, 41
Alarm System Name, 41
Alternate Information Display, 15
Annunciator Displayed But Equipment Not Energized, 47
Auxiliary Relay, 27
Blinking Display, 46
Blinking Heat or Cool Annunciator, 46
Broadcast Acknowledger, 39
Cannot Detect Closed Damper, 36
Cannot Detect Indoor Fan Off, 34
Cannot Detect Indoor Fan On, 33
Cannot Detect Open Damper, 36
Comfort Trend Demand Set Point, 33
Comfort Trend Error, 33
Comfort Trend Time Limit, 33
Communication Check, 18
Communication Error, 33
Communication Failure Alarm, 44
Communication Failure Retry Time, 41
Communications, 18
Computer Configuration, 12
Conduit Guidelines, 2
Configuration, 12
Control of Heating and Cooling Equipment, 25
Cooling Lockout Temperature Set Point, 29
Counterclockwise Open Damper Modulation, 31
Damper Control, 29
Damper Interface, 30
Damper Modes, 30
Damper Modulation, 31
Damper Position End Switch, 30
Daylight Savings Time, 39
Daylight Savings Time Minutes to Add, 39
Daylight Savings Time Minutes to Subtract, 39
Daylight Savings Time Start Day, 39
Daylight Savings Time Start Month, 39
Daylight Savings Time Start Week, 39
Daylight Savings Time Stop Day, 39
Daylight Savings Time Stop Month, 39
Daylight Savings Time Stop Week, 39
Device Access Security Level, 16
Device Address, 15
Device Bus Number, 16
Diagnostics, 32
Dirty Filter Error, 34
Discharge Air Temperature Alarm
(Heat/Cool Mode Error), 42
Display Freeze, 15
Duct Temperature Sensor, 21
Duct Temperature Sensor Calibration, 21
Duct Temperature Sensor Out of Range, 37
DX (Direct Expansion) Coil Temperature Sensor, 22
DX Coil Temperature Sensor Calibration, 22
DX Coil Temperature Sensor Out of Range, 37
Electronic Timeclock, 15
Equipment Operation, 27
Equipment Operation During System Cooling Mode, 27
Equipment Operation During System Heating Mode, 27
Equipment Operation Problems, 46
Equipment Operation with Economizer Control, 27
Equipment Priority, 41
Error Code Display, 32
Example of Clearing an SF Error, 36
Fan/Filter Status Switch, 24
Fan Operation for Heat, 26
Fan Status Alarm, 43
Fan Switch, 26
Filter Status Alert, 43
General, 2
General Operating Problems, 46
Global Schedule Broadcast, 39
Grounding Guidelines, 4
Hardware A/D Failure, 37
Hardware Failure (HF) Errors, 36
Hardware NOVRAM Failure, 37
Heating and Cooling Time Guard, 29
Heating/Cooling Equipment Interface, 25
Heating Lockout Temperature Set Point, 29, 31
Heating Mode Error Set Point, 34
High/Low Temperature Limit Exceeded, 34
High/Low Temperature Limit Time Guard, 28
Holiday Schedules, 41
Humidity Sensor Calibration, 23
Humidity Sensor Out of Range, 38
HVAC Override Usage Meter, 32
HVAC Usage Meter, 32
Indoor Air Humidity Sensor, 23
Indoor Air Quality Alarm Delay, 24
Indoor Air Quality Economizer Delay, 24
Indoor Air Quality Error, 34
Indoor Air Quality Function, 23
Indoor Air Quality High Temperature Lockout, 24
Indoor Air Quality Humidity Lockout Set Point, 24
Indoor Air Quality Low Temperature Lockout, 24
Indoor Air Quality Maximum Space Temperature Reset, 24
Indoor Air Quality Sensor Calibration, 23
Indoor Air Quality Sensor Installation, 5
Indoor Air Quality Status Alarm, 44
Installation, 2
Loadshed, 41
Local IAQ Sensor, 23
Local Mode, 30
Local Zone IAQ Problem, 24
Manual Configuration, 12
Manual Unoccupied Override, 20
Maximum Damper Position, 31
Meter Full Error, 33
Metering, 32
Minimum Damper Position, 31
Monitor Mode Applications, 4
Monitor-Only Applications, 4
Monitor-Only Mode IAQ Wiring, 5
Monitor Reset, 38
Monitor Thermostat Display, 12
Monitor Thermostat Fails to Energize Second Stage, 47
Monitor Thermostat Fails to Select System Mode, 46
Monitor Type, 16
Network Accessible Variables, 45
Network Setup and Configuration, 38
Network Time Broadcast, 18
Network Time Broadcaster, 38
Network Time Requester, 39
No Display, 46
Occupancy Schedules, 19
Occupancy Schedule Mode, 19
Occupied Mode Operation, 18
Occupied Set Point Limiting, 19
Occupied Set Points, 18
Optimal Start, 20
Optimal Start Time Limit, 20
Optimize Staging, 27
Outside Air Temperature Sensor, 22
Outside Air Temperature Sensor Calibration, 22
Outdoor Air Temperature Sensor Out of Range, 38
Override Usage Meter, 32
Power-Up Time Guard, 29
Pre-Occupancy Purge, 29
Programming Schedules Using Software, 19
49