Specifications

Table 1 — VVTT Monitor Thermostat Categories and Options
OPTION DESCRIPTION DEFAULT MINIMUM MAXIMUM
CATEGORY 1.0 SET POINTS
1.1 Cooling Set Point Low Limit (F) 68 50 99
1.2 Heating Set Point High Limit (F) 75 50 99
1.3 Unoccupied Cooling Set Point (F) 80 50 99
1.4 Unoccupied Heating Set Point (F) 65 40 99
1.5 Rotating Display OFF OFF ON
1.6 Fahrenheit Temperature Display ON OFF ON
CATEGORY 2.0 OCCUPANCY SCHEDULE
2.1-2.8
Occupancy Period (1-8)
Days
Start Time
Stop Time
MTWTF
06:00 AM
06:00 PM
NONE
12:00 AM
12:00 AM
MTWTFSSH
11:59 PM
11:59 PM
2.9 Schedule Number* 0 0 99
2.10 Override Time Limit (Hours) 1 0 4
CATEGORY 3.0 DAMPER
3.1 Maximum Damper Position 15 8 15
3.2 Minimum Damper Position 0 0 7
3.3 Ventilation Position 5 0 7
3.4 ZD/RD Actuator ON OFF ON
3.5 Counterclockwise Open ON OFF ON
CATEGORY 4.0 HVAC EQUIPMENT
4.1 Fan Operation For Heat ON OFF ON
4.2 Time Guard Between Modes ON OFF ON
4.3 Time Guard Override OFF OFF ON
4.4 LAT Monitoring ON OFF ON
4.5 First Stage Cooling Temperature Limit (F) 45 40 45
4.6 Second Stage Cooling Temperature Limit (F) 50 45 50
4.7 First Stage Heating Temperature Limit (F) 110 110 180
4.8 Second Stage Heating Temperature Limit (F) 105 105 160
4.9
Auxiliary Relay (0 — No Control, 1 — Occupied Schedule, 2 — IAQ,
3 — Reversing Valve, 4 — Economizer)
004
4.10 Optimize Staging ON OFF ON
4.11 Cooling Temperature Lockout OFF OFF ON
4.12 Cooling Lockout Set Point (F) 40 10 80
4.13 Heating Temperature Lockout OFF OFF ON
4.14 Heating Lockout Set Point (F) 60 10 80
4.15 System Mode Demand 1 1 16
4.16 System Mode Re-select (Minutes) 30 0 480
4.17 Minimum Heat Run Time (Minutes) 3 1 30
4.18 Minimum Cool Run Time (Minutes) 3 1 30
4.19 Pre-Occupancy Purge OFF OFF ON
4.20
Fan Switch Control (0 — Use Thermostat Switch Position,1—Fan
Switch ON, 2 — Fan Switch AUTO)
002
4.21
Cool Switch Control (0 — Use Thermostat Switch Position, 1 — Cool
Switch AUTO, 2 — Cool Switch OFF)
002
4.22
Heat Switch Control (0 — Use Thermostat Switch Position, 1 — Heat
Switch AUTO, 2 — Heat Switch OFF)
002
CATEGORY 5.0 SENSORS
5.1
Room Sensor (1 — Local Room Sensor, 2 — Remote Room Sensor,
3 — Average Local and Remote Room Sensor)
113
5.2 Zone Temperature Sensor Calibration (F) Zone Temp. 30 180
5.3 Remote Room Sensor Calibration (F) Room Temp. 30 180
5.4 Duct Temperature Sensor OFF OFF ON
5.5 Duct Temperature Sensor Calibration (F) Duct Temp. 30 180
5.6 DX Coil Temperature Sensor OFF OFF ON
5.7 DX Coil Temperature Sensor Calibration Coil Temp. 30 180
5.8 Outdoor Air Temperature Sensor (OAT) OFF OFF ON
5.9 Outdoor Air Temperature Sensor Calibration
Outdoor
Temp.
-40 150
5.10 Fan Status Switch OFF OFF ON
5.11
Humidity Sensor/Filter Status (0 — No Sensor, 1 — Indoor Humidity Sen-
sor, 2 — Filter Status Switch)
002
5.12 Humidity Sensor Calibration
Indoor
Humidity
0 100
13