Operating instructions

3. Remove 2 screws attaching intermediate front panel to left and right side jacket panels.
4. Remove draft diverter and intermediate front panel as 1 unit.
5. Carefully remove cerafelt gasket strips.
6. Clean passageways between sections with a flexible handle wire brush. Remove dirt from bottom of boiler and between sections by
vacuuming.
7. Make sure all flame ports in burners are open and clear. Shake out or blow out all loose dirt in burners.
8. Reseal seams between adjacent sections as necessary with 400°F RTV silicone sealant.
9. Reassemble all parts. Be sure to check tightness of pilot connections and condition of burner flames after reassembly. (See Fig. 14 and 15.)
10. Be sure vent pipe connections to chimney are secure and no obstructions are present.
—20—