Product data

Options and accessories (cont)

FACTORY-INSTALLED APOLLO

COMMUNICATING CONTROLS

The Apollo direct digital controls are designed exclusively by Carrier,

and are used to actively monitor and control all modes of operation

as well as to monitor evaporator-fan status, filter status, supply-air

temperature, outdoor-air temperature, and indoor-air quality. They

are designed to work in conjunction with Carrier TEMP and VVT®

(Variable Volume/Variable Temperature) system thermostats.

PREMIERLINK™ COMMUNICATING CONTROLS

Carrier’s newest CCN rooftop control for 50TJQ and 50HJQ

units. PremierLink is plug and play compatible with Com-

fortLink™ controls and is DCV (Demand Control Ventilation) and

Internet ready.

ELECTRONIC PROGRAMMABLE

THERMOSTAT

Carrier’s electronic programmable thermostat provides efficient

temperature control by allowing you to program heating and cool-

ing set-backs and set ups with provisions for weekends and holi-

days. Accessory remote sensing package is also available to

provide tamperproof control in high traffic spaces. Used in con-

junction with factory-installed Apollo control, this thermostat pro-

vides a 5-minute recycle timer between modes of operation for

short-cycle protection.

Designed specifically for use with Carrier commercial systems, this

Carrier programmable thermostat features LED occupied/

unoccupied displays and setback mode which can override continu-

ous fan operation.

CARRIER TEMP SYSTEM THERMOSTAT

TIME GUARD® II CONTROL

Time Guard II Control automatically prevents compressor from re-

starting for at least 5 minutes after a shutdown. Accessory prevents

short cycling of compressor if thermostat is changed rapidly. Time

Guard II control mounts in the control compartment of unit.

AUTO

COOL

HEAT

Carrier

CARRIER DEBONAIR® THERMOSTAT

Carrier’s Debonair line of commercial programmable thermostats

are wall-mounted, low-voltage thermostats which maintain room

temperature by controlling operation of an HVAC (Heating, Venti-

lation, and Air-Conditioning) system. Separate heating and cool-

ing set points and autochangeover capability allow occupied and

unoccupied programming for energy savings.