Specifications

6

Installation Instructions
PLEASE ENGAGE LOCAL PROFESSIONAL INSTALLER TO
PERFORM INSTALLATION. PLEASE ALWAYS FOLLOW LOCAL
BUILDING CODES, ELECTRICAL CODES AND LOCAL LAWS.
1. Preliminary Checking:
1) The ceiling structure should support at least FOUR times the total weight
of the lift and projector. Please reinforce additional supporting structure if
needed.
2) Please check the overall dimensions of the lift and ensure that there is
sufficient space above ceiling before installation.
3) 100mm (4″) clearances from all surrounding structures are recommended.
The minimum ceiling space required for the lift to install at ceiling is
680mmWx680mmDx850mmH for AC 310 and
680mmWx680mmDx1050mmH for AC 510. The installer must be
accessible to every side in order to install the lift.
4) Check the dimensions of the projector to be mounted within the available
space.
5) Determine the projector installation position based on projection screen
location and projector specifications.
6) Confirm that there is adequate space for installation, operation and
maintenance.
7) Arrange the space for service and the access to the lift.
8) Confirm height of ceiling with maximum travel of the lift.
9) Physically check for any damages or loose parts on the lift.
2. Guidelines for Installation:
1) Read the instructions carefully before installation. An incorrect
installation could lead to serious injury or damage to the lift.
2) Installer must ensure that all fasteners support have adequate strength to
securely support the lift and projector.
3) The lift must be installed in level from front-to-back and side-to-side.