Specifications

3

4) Clear all persons and obstructions along the lift travel path while it is
operating or in service.
5) Watch the moving projector lift and keep people away until the projector
lift is completely closed.
6) Please do not close the lift while the projector is running or while it is in
“cool down” operation to avoid premature failure of electrical or
electronic components.
7) Please do not step on the lift or cage. Overloading could lead to damage
of equipment or injury.
ELECTRICAL RISK
1) Please check the standard of the local power supply before installation
and ensure that the operation voltage of the motor is related to the local
power supply. The motor may damage due to incorrect voltage supply.
2) Never operate the lift with damaged or faulty cord or plug.
3) Please keep the cord away from heated surface.
4) Please turn off power supply before cleaning or servicing.
The Xtension Lift
Overview
The lift is powered by a linear actuator which is operated on Single phase
230~240 V AC 50 Hz. It provides an attractive solution to recess a projector in
ceiling or conference table and it can be extended to projection level.
The lift is shipped with the carton box and the following items are allocated.
Please inspect them for any damage when receive the lift.
1) The Xtension lift
2) IR transmitter and remote control
3) Projector cage (Detachable)
4) User Manual
5) A package of screws for projector