Specifications

14

3) To set UP limit (store position),
(i) Bring the lift up to the store position or flush with the ceiling
board.
(ii) Loosen the screws of the UP limit positioner and slide it upward
until it touch the limit stopper
(iii) Re-tightened the screw.
Fig. Setting UP limit
4) Please operate the lift UP and DOWN to counter check the limit setting.
5) Make sure that projector’s cables are long enough to travel up and down.
6) Please put all the projector cables inside the cable carrier.
7) The projector should be adjusted at the screen level as necessary.
Concrete Ceiling
Threaded Rods (x4)
Down Limit Positioner
UP Limit Positioner
False Ceiling