Specifications

A-14 Safety-door Switch D4NS
D4NS
Safety Door Switches
Recommended Connectors
Use the connector with thread section of 9 mm long or less. In the
case of the connector with longer thread section, protruded part may
interfere with the other parts inside the body. Use below listed
connector to secure IP67.
When use LAPP's products, use together with a Seal Packing which
is sold separately (Type names, JPK-16, GP-13.5, GPM20. GPM12
is for M12 connector) and tighten with proper tightening torque.
LAPP is a German manufacturer.
Before using the 2 conduit type 1/2-14NPT connector, attach the
appended changing adapter to the Switch, and wind the seal tape
about the joint of the adapter and Switch.
When use M12 conduit type, connect the above listed connector,
after tightened the M12 changing adaptor to the Switch.
Size Manufacture Type Adequate cable
diameter
G1/2 LAPP ST-PF1/2
5380-1002
6.0 to 12.0 mm
Pg13.5 LAPP S-13.5
5301-5030
6.0 to 12.0 mm
M20 LAPP ST-M20
× 1.5
5311-1020
7.0 to 13.0 mm
1/2-14NPT LAPP ST-NPT1/2
5301-6030
6.0 to 12.0 mm