Technical data

ManualsBrandsCarrier ManualsAir Compressor73X

82 | Setting and monitoring the dispenser Operating manual ALX 73x | file version 02 | 03/2012

TARTUP

AND

OPERATION

ALX

73x

Setting and monitoring the

dispenser

Settings in parameter menu

Label pitch



Switch to offline mode

To measure label pitch automatically:



Works only up to max. 120 mm label pitch

 Press and hold the key (for longer than 2 sec-

onds).

Also possible: enter the label pitch manually:

1. Measure label pitch [80C].

2. Open function LABEL SETUP > Label pitch.

3. Enter the measured value in millimetres.

Dispensing speed

The dispensing speed can be set to a fixed value or it

can automatically follow the speed of the conveyor belt

(speed adaptation). A rotary encoder must be connect-

ed for operation with speed adaptation. The rotary en-

coder measures the belt speed and transmits it to the

dispenser.



With direct dispensing (i.e. without applicator) the

dispensing speed normally corresponds to the product

speed.

Setting to a fixed value:

 Set the speed in online mode with the two left keys

(see Online mode  on page 38).

Or:

 Open LABEL SETUP > Dispense speed and set to the re-

quired speed.

Setting to speed adaptation:

1. Set MACHINE SETUP > Speed Adaption to "Yes"

to switch on the function.

2. MACHINE SETUP > Encoder Resol. and

set MACHINE SETUP > Encoder Diameter according to

the rotary encoder you are using.

Information about suitable rotary encoders: see service

manual.

[80] Label material (self-adhesive labels)

A Label belt (backing paper)

B Label

C Label pitch