Technical data

74 | Inserting/replacing ribbon Operating manual ALX 73x | file version 00 | 03/2012

TARTUP

AND

OPERATION

ALX

73x

5. Press the feed key.

The last (incomplete) label to be printed will be

printed again. Then printing continues with the cur-

rent print job.

Now the label that was not completely printed must be

removed.

As soon as the label that was not completely printed is

at the front of the buffer loop [65A]:

1. Press the Enter key.

The printer prints the current label completely and

then stops. As soon as the buffer loop is empty, the

dispenser also stops.

2. Remove the label that was not completely printed.

3. Press the feed key.

The print job continues.

[65] Remove the label that was not completely printed when it is at the

front of the buffer loop (A).