Technical data

70 | Inserting label material Operating manual ALX 73x | file version 05 | 03/2012

TARTUP

AND

OPERATION

ALX

73x

Thread in the label web on the drive roller

1. Open the pressure roller. To do this turn the lever

[56A] clockwise.

2. Position the backing paper around the deflection

roller [56B] and drive roller [56C].

3. Close the pressure roller. To do this turn the

lever [56A] anticlockwise until you feel it snap into

place.

Thread the label web onto the rewinder

1. Guide the backing paper around the deflection roll-

er and dancer lever [57].

2. Clamp the backing paper in place as shown on the

rewinder [58].

When the machine is switched off:

 Turn the rewinder clockwise until the backing paper

is taut [59].

When the machine is switched on:

1. Ensure that the printer and dispenser are both in

"Offline" mode.

2. Press the dancer lever against the upper stop and

hold it there for longer than 2 seconds.

The following error message appears on the dis-

penser´s display:

Now, the rewinder can be turned manually.

3. Turn the rewinder one turn.

4. Press the -key to acknowledge the error mes-

sage.

Status num: 5143

Rewinder stop

[56] Open the pressure roller.

[57] Guide the backing paper around the dancer lever and deflection

roller.

[58] Clamp the backing paper firmly in place on the rewinder.