Technical data

Operating manual ALX 73x | file version 05 | 03/2012 Inserting label material | 69

TARTUP

AND

OPERATION

ALX

73x

Thread in the label web on the dispensing

edge

Fixed [53] and swivelling L-shape dispensing edges:

1. Guide the backing paper around the first deflection

roller [53A] and through the slot in the sensor [53B].

2. Guide the backing paper under the pressure roller

[53C] to the dispensing plate [53D].

3. Guide the backing paper around the dispensing

plate to the second deflection roller [53E].

4. Set the tension of the backing paper so that the

dancer lever is in the centre or at the upper limit.

Spring-loaded [54] and pneumatic [55] L-shaped dis-

pensing edges:

 Guide the backing paper between the two thin guide

rollers at the articulation point [54A] [55A] as well.

[55] Flow of the label web on the pneumatic dispensing edge (option-

al).

[53] Flow of the label web in the area of the dispensing edge.

A 1. Deflection roller

B Label sensor

C Pressure roller

D Dispensing plate

E 2. Deflection roller

[54] Flow of the label web on the spring-loaded dispensing edge

(optional).