Technical data

64 | Inserting label material Operating manual ALX 73x | file version 05 | 03/2012

TARTUP

AND

OPERATION

ALX

73x

Inserting label material

Inserting the label roll

1. If necessary, adjust the diameter of the unwinding

mandrel to the core diameter of the material roll;

see section

Adjusting the core diameter of the

unwinder

on page 75.

2. Push the material roll [44A] onto the dispenser until

it stops.

3. Turn the knob [44B] clockwise until the label roll is

firmly seated.



For the remainder of the material flow, see sec-

tion

Threading in the label web  on page 65.

WARNING!

Danger of injury due to moving and rapidly

rotating parts!

 Before inserting the label roll ensure that

the printer and dispenser are both in offline

mode.

Danger of injury caused by falling label roll.

 Wear safety shoes.

[44] Inserting a material roll