Technical data

62 | Electrical connections Operating manual ALX 73x | file version 00 | 03/2012

TARTUP

AND

OPERATION

ALX

73x

Electrical connections

Connecting to the mains power

supply

The machine mains supply plug is delivered with the

machine, unattached.

The mains supply plug must only be connected

with the mains power connecting line by an

authorised specialist. The specialist must be

acquainted with the associated dangers.



For information about preparing the mains power

connecting line, see the Assembly/Service manual.

To plug in the mains power connecting line:

1. Ensure that the machine is switched off (mains

power switch [39A] in position "O").

2. Plug the mains power connecting line [39B] into the

machine.

3. Close the safety bracket [40].

To unplug the mains power connecting line:

1. Ensure that the machine is switched off (mains

power switch [39A] in position "O").

2. Open the safety bracket [39B].

3. Remove the mains power connecting line.

WARNING!

This unit operates at mains voltage! Contacting electrically live components can

cause lethal electrical shocks and burns.

 The machine must only be connected to the mains power supply by an

authorised specialist. This person must be acquainted with the associated dangers.

 Only operate the unit at the mains voltage given on the type plate.

 Make certain the units is switched off before you plug in the mains power

connecting line.

 The maximum permitted length of the mains power connecting line is 3 m.

[39] Mains power connecting line (B) plugged in.

[40] Safety bracket closed.