Technical data

52 | Dispenser parameter menu Operating manual ALX 73x | file version 02 | 03/2012
P RODUCT DESCRIPTION
ALX
73x
Information about the parameter description
• The setting range or the individual settings of a parameter are shown in square
brackets.
• For parameters with individual setting values, the preset value is shown in italic
type.
Tips for data entry in the parameter menu
Line overflow If the displayed text is longer than the length of the line in the display:
Move text to the left:
 Press the key.
Move text to the right:
 Press the key.
Entering network
addresses
To move to the next/preceding alphanumeric character:
 Press the or key.
Confirm the selection and move to the next position:
 Press the key.
 It is also possible to make entries using the WEB server function.
Quick adjustment
LABEL SETUP menu
Load prod.profil Load product profiles from the internal database.
Product profiles contain product-specific settings.
Max. 16 product profiles can be selected.
The number of a product profile can only be selected if a profile is already stored under
that number.
Gap detect. mode After the following events the dispenser needs to detect the punch again, i.e. initialise
the label material: after switching on; after changing material.
Settings: [Manual, "Autom. forward"]
• Manual: The operator must start the initialisation of the the label material manually
(by pressing the feed key several times).
• Autom. forward: The label material is initialised automatically if necessary.
Dispense speed Speed at which the label is dispensed
Setting range: [5.0…50.0] m/min; default: 10,0
Keys Effect
+ Reduce value ten times faster
+ Increase value ten times faster
+ Reset value to lowest setting
[tab. 15] Key combinations for quick adjustment of parameters with a large value range.