Technical data

Operating manual ALX 73x | file version 00 | 03/2012 Printer operating modes | 49
P RODUCT DESCRIPTION
ALX
73x
GB
Standalone mode
In standalone mode, print jobs are not transferred via data cable but are instead stored
on a memory card. You can access them there from the printer control panel or using
a connected keyboard.
Activate standalone
mode
1. Switch off the machine.
2. Save relevant print jobs in the \Formats directory on the memory card.
 Files with print jobs must have the ending *.for.
3. Insert the memory card in the printer's card slot.
4. Switch on the machine.
Initial operating mode: online or offline.
5. Press Online+Esc keys.
Screen:
Screen if no file was found:
Starting a print job 1. Activate standalone mode as described above.
2. If there are several print jobs: Press the feed/apply keys keys until the required
print job appears.
3. Press the online key to confirm the selection.
Screen:
 Depending on the print job, the user may be prompted for additional entries.
4. Press the online key to confirm the number or the Esc key to delete the number.
5. Proceed in the following manner for each required digit:
– Press the feed/apply key to select a number from 0 to 9.
– Press the online key to move to the next digit.
6. Press the online key twice to confirm the selection.
The print job is now processed.
7. You can also optionally press the online+Esc to switch to online mode.
Select file
Avery.for
a
a) Filename of the print job. If there are several print jobs:
filename of the first print job in alphabetical order.
Standalone
No files!
Enter quantity
x
a
a) Assignment for quantity (in this case x) is included in the
print job.