Technical data

Operating manual ALX 73x | file version 03 | 03/2012 Overview | 31
P RODUCT DESCRIPTION
ALX
73x
GB
H Connection to the mains power supply
I Label sensor
J Product (start) sensor (available as accessory)
K Rotary encoder (available as accessory); used for operation with automatic speed
adaptation
L Alternative label sensor (see
Capacitive label sensor  on page 35)
M Position sensor of the linear dancer lever
N OD
1
sensor for external OD monitoring (see Roll diameter sensor  on page 34)
O (Dispenser) signal inputs (connection only to ALX 73x in the "complete") design;
used to exchange signals with other machines or control an applicator
P (Dispenser) signal outputs (connection only to ALX 73x in the "complete") design
Q OD sensor 1 (for internal OD monitoring on dispenser 1, see
Cable kit for internal
roll diameter monitoring
 on page 34)
R OD sensor 1
S OD
1
sensor 2 (for internal OD monitoring on dispenser 2)
T OD sensor 2
U (Dispenser) PLC signal interface/applicator interface (switchable); used to ex-
change signals with other machines or control an applicator
V (Dispenser) USB interface type A (host); used to transfer print jobs from a host (for
example a PC); read service data; transfer firmware
W (Dispenser) card slot for CompactFlash cards; used to store/load service data or
firmware
X (Dispenser) connection for remote control panel
(see
External control panels  on page 32)
Y (Dispenser) Serial interface (RS 232); used to read service data; transfer firmware
Z (Dispenser) network connection (Ethernet 10/100); used to read service data;
transfer firmware; operate via web server
1) OD = outer roll diameter