Technical data

26 | Overview Operating manual ALX 73x | file version 03 | 03/2012
P RODUCT DESCRIPTION
ALX
73x
F Rewinder
Winds up the empty carrier material.
G Unlocking button
Pressing the button reduces the diameter of the rewinding core. This makes it pos-
sible to remove wound carrier material easily.
H Dispenser control panel (dispensing module "LMA")
To enter commands on the dispensing section of the machine and display operat-
ing states and error messages.
I Pressure mechanism
Presses the pressure roller against the drive roller. Prevents the carrier material
from slipping. Is automatically unlocked if the carrier material is drawn around the
drive roller.
J Printer control panel (print module "PMA")
To enter commands on the printing section of the machine and display operating
states and error messages.
K Dispensing edge
Shown here: fixed L-shape dispensing edge. The following options are available:
swivelling L-shape dispensing edge, spring-loaded L-shape dispensing edge,
pneumatic L-shape dispensing edge
L Label sensor
Stops the label feed after dispensing a label.
M Pressure roller
Presses the label after dispensing onto the product.
N Dispensing edge holder
Holds L-shape dispensing edges in position. Not required for V-shape dispensing
edge.
O Dancer lever
Holds the buffer loop under tension.
P Adjusting knob
For setting the spring tension of the dancer lever.
Q Feed roller