Technical data

20 | Dispensing module Operating manual ALX 73x | file version 03 | 03/2012
T ECHNICAL D ATA
ALX
73x
Dispensing module
Variables
Dispensing speed Up to 50 m/min
Label stop accuracy on
the dispensing plate
At a constant dispensing speed: ± 0.5 mm
At a variable dispensing speed (range of 5-50 m/min): ±1.0 mm
Speed control Fixed setting or automatic speed adaptation via encoder.
Label sensor
Distance from the
dispensing plate
L-shape dispensing edge: 19 mm
Sensor type Transparent sensor, type Wenglor "OPT242-P800 optical", NPN
Interfaces
Data interfaces
Signal interfaces
Interface Details
Serial RS 232C (Sub-D9), 300 -115200 baud
Ethernet 10/100 Base T (RJ45)
USB Device V1.1 (USB-B), operating mode "Full speed", 12 MBit/s
CF card Slot for CompactFlash card
Control panel
interface
RS 485 (Mini DIN 6-plug) for remote control panel
[tab. 8] Data interfaces on the ALX 73x dispensing module.
Interface Details
Applicator
interface
Optional (AI board): control signals for applicators
PLC interface
Sub-D15, optically insulated, optionally
1
via two 8-pin M12s (inputs/
outputs separated)
Outputs: 4x PNP (high side drive), 24 V, max. 500 mA/channel, total
permissible output current: 1500 mA
Inputs: 3x PNP/NPN, 24 V
1) Configuration option „full“
[tab. 9] Signal interfaces on the ALX 73x dispensing module.