Technical data

18 | Print module Operating manual ALX 73x | file version 03 | 03/2012
T ECHNICAL D ATA
ALX
73x
Thermal transfer ribbon
Winding direction Coloured side wound inward or outward
Roll
Interfaces
Variable Dimension
Outer Ø max. 110 mm
1
1) Corresponds to 1000 m standard ribbon type Avery 2240 with a
ribbon core of 40.2 mm.
Core inside Ø
25,4 mm (1")
40,2 mm (1.6")
2
2) With ribbon core adapter (accessory)
Width
3
3) As a general rule, the thermal transfer ribbon must overlap the label
being printed on both sides by 2 mm.
20 -140 mm
[tab. 5] Dimensions of usable ribbon rolls.
Interface Std. Opt. Details
RS-232 X Baud rate: 1200-115200, 8 bits; suitable connection
cable: 1:1 Sub-D9 extension cable (plug/socket)
RS-232 (addi-
tional)
X Optional (I/O board
1
): Baud rate: 1200-115200, 8 bit;
Sub-D 9
1) I/O board and Centronics board are mutually exclusive. Only one of the two additional boards can be
installed.
RS-422/485 X Optional (I/O board
1
): Sub-D15, baud rate: 1200-
115200, 8 bits
Ethernet X 10/100 Base T with TCP/IP, LPD, RawIP printing,
DHCP, HTTPD, FTPD, SNMP
USB (V1.1) X 2x USB-A host port, 1x USB-B device port, transfer
rate 12 Mb/s.
Centronics X Optional (Centronics board
1
): Bidirectional mode
(nibble mode) corresponding to IEEE 1284 B
[tab. 6] Data interfaces on the ALX 73x print module.