Technical data

16 | Print module Operating manual ALX 73x | file version 03 | 03/2012
T ECHNICAL D ATA
ALX
73x
Character sets • 17 character sets with fixed size (fixedfonts) including OCR-A and OCR-B
• 3 Scalable character set (speedo fonts)
• TrueType character sets are supported (in Unicode as well)
• TrueType, speedo and fixed size fonts can be optionally stored on a memory card
Code pages • DOS 437
• DOS 850
• ANSI 1250
• ANSI 1252
• UTF 8
• Legacy code page (7 bits)
Character modification • Scaling in x/y direction up to a factor 16
• Rotation by 0, 90, 180, 270 degrees
Impression accuracy • In printing (y-) direction:
The impression accuracy depends on the print position. With the printout starting
directly at the punch position, the accuracy is ±0.5 mm. A distance between punch
(that is label start) and print position will add ±1% of this distance to the accuracy
fault (see fig. [4]).
• X-direction: ± 0.5 mm.
[4] Impression accuracy in printing direction, depending on the printing position.
Graphic formats BMP, PCX, JPG, TIF, GIF, Easy-Plug logos
+0,5
+1,0
+1,5
+2,0
mm
+3,0
Max. misalignment of the printing position
- 0,5
-1,0
-1,5
-2,0
-2,5
-3,0
50
100 150 200 mm 300
Distance
punch - printing position
Punch position
Printing
direction
0
Printing position 1 Printing position 2
Max. misalignment at
printing position 1
= 1,0 mm
Max. misalignment at
printing position 2
= 2,5 mm
Label
+1%
-1%
Punch
Z00521E.cdr