Technical data

Operating manual ALX 73x | file version 03 | 03/2012 Print module | 15
T ECHNICAL D ATA
ALX
73x
GB
Print module
Performance data
Printing technology Thermal direct or thermal transfer printing
Printhead type "Corner Edge" type
Printhead variables
Label sensor
Light transmission/reflex sensor (combination sensor; detects both punches/gaps and
reflex markings on the bottom of the material).
• ALX 734/5: 2-80 mm
• ALX 736: 2-100 mm
Recommended punch dimensions.
• Punch length [3b]: 0.8-14 mm
• Punch width [3a]: min. 4 mm
[3] Dimensions and adjustment range of the punch / reflex marking.
Max. print length The maximum print length depends on the following factors:
• Printer type
• Printer resolution
• Firmware version
• Parameter settings for memory configuration
(for example SYSTEM PARAMETER > Free Store Size)
Zero line Offset of the material zero line from the print zero line: 1 mm (i.e. one strip 1 mm in
width on the inside label edge cannot be printed).
Printer
Resolution
(dots/mm)
Resolution
(dpi)
Print speed
(mm/s)
Print
speed
(inch/s)
Max. print
width
(mm)
ALX 734 12.0 300 50-400 2 -16 104
ALX 735 12.0 300 50-400 2 -16 127
ALX 736 12.0 300 50-300 2 -12 160
[tab. 4] Printhead variables.
a
b
c
Z0211.cdr
Punch / reflex markingLabel sensor Label material