Manualshelf

Technical data

ManualsBrandsCarrier ManualsAir Compressor73X
111112113114115116117118119120
118 | Sensors Operating manual ALX 73x | file version 00 | 03/2012
C
LEANING
ALX
73x
Cleaning the material end sensor
The material end sensor [106A] is located inside the
material guide. The sensor must be cleaned of material
and dust residue regularly. The cleaning intervals de-
pend on the material in use.
Clean the sensor arm using compressed air (canned
air is available as an accessory).
If the sensor is heavily contaminated, use cleaning
solvent and a lint-free cloth to clean the sensor.
[106]Material end sensor (A) in the inside material guide
A