Technical data

106 | Reference status messages - printer Operating manual ALX 73x | file version 00 | 03/2012
O PERATING FAULTS
ALX
73x
5008 Foil end
In thermal printing:
 Ribbon end sensor is not switched off.
 SYSTEM PARAMETER > Ribbon autoecon. = "Thermal printing".
In thermal transfer print:
 Ribbon roll is used up.
 Insert a new ribbon roll.
 The core of the ribbon roll is resting loosely on the dispenser.
 Use a ribbon roll with a suitable core diameter.
 Adjust the spring plate on the ribbon unwinding mandrel so that the ribbon
core is firmly seated.
5063 Press roll
 The lever of the label material pressure roller (green lever) is open.
 Close the lever.
Closing the pressure roller automatically deletes the error message.
5110 Foil low
 The diameter of the ribbon roll has reached the value set under SYSTEM PARAMETER
> Foil end warning.
 Prepare to change the ribbon roll.