Technical data

104 | Status messages on the printer Operating manual ALX 73x | file version 00 | 03/2012
O PERATING FAULTS
ALX
73x
Status messages on the printer
Error messages
When a fault occurs, the printer shows an error message on the control panel.
Error messages are based on the following outline:
To delete an error message:
1. Rectify the cause of the fault. For further details see section
List of error mes-
sages
 on page 105.
2. Press the key to delete the message.
Error messages that are not described below can only be rectified by qualified service
personnel.
If an error that is not described here occurs:
1. Press the key to delete the message.
2. Switch off the device, wait for 30 seconds and switch it on again.
If the error occurs repeatedly:
 Call in a service technician.
Error messages not mentioned here are described in the service manual.
While an error message is being displayed, the "Error" signal output is active.
Print status
a
: 5144
b
Rewinder init
c
a) Depending on the cause of the error, "Print Status" or "Queue Status" appears here. "Print Status" =
message from the printer controller; "Queue Status" = message from the Easy-Plug Interpreter.
b) 5144 = The status number. This number is an easy way to identify the message.
c) "Rewinder init" = Status text; brief description of the error.