Manualshelf

Technical data

ManualsBrandsCarrier ManualsAir Compressor73X
101102103104105106107108109110
Operating manual ALX 73x | file version 01 | 03/2012 Reference status messages - dispenser | 103
O
PERATING
FAULTS
ALX
73x
GB
6030 New parameters
New firmware has been loaded, which has caused new functions to be added to
the menu.
Press the online key to confirm.
The system is restarted.
All parameters are set to the factory setting.
6207 No file card
No memory card was found.
Check to see whether a memory card is inserted. If the memory card was not in-
serted until after the machine was switched on: Turn the machine off and on again.
9022 No network link
This status message can only occur if the Ethernet address assignment is set to
DHCP (INTERFACE PARA > NETWORK PARAM. > IP Addressassign).
Network plug not correctly connected.
Check whether the network plug is correctly connected and correct it if necessary.