NetVanta 4660/5660 Hardware Installation Guide 17004660F1/F3 NetVanta 4660 Chassis 17005660F1 NetVanta 5660 Chassis 17406368F1 NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex A 17406368F3 NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex B 17806368F1 NetVanta Carrier Ethernet Octal SHDSL EFM Module, Annex A 17806368F3 NetVanta Carrier Ethernet Octal SHDSL EFM Module, Annex B 17406369F1 NetVanta Carrier Ethernet Quad VDSL2 EFM Module, Annex A 17406369F3 NetVanta Carrier Ethernet Qu
Trademarks NetVanta 4660/5660 Series Trademarks Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice.
NetVanta 4660/5660 Series Conventions Conventions Notes provide additional useful information. Cautions signify information that could prevent service interruption or damage to the equipment. Warnings provide information that could prevent injury or endangerment to human life. 617004660F1-34A Copyright © 2014 ADTRAN, Inc.
Safety Instructions NetVanta 4660/5660 Series Safety Instructions When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There is a remote risk of shock from lightning. 3.
NetVanta 4660/5660 Series FCC-Required Information FCC-Required Information FCC regulations require that the following information be provided in this manual: 1. This equipment complies with Part 68 of Federal Communications Commission (FCC) rules and requirements adopted by America’s Carriers Telecommunications Association (ACTA). Each registered interface has a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX.
FCC Radio Frequency Interference Statement NetVanta 4660/5660 Series FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
NetVanta 4660/5660 Series Toll Fraud Liability Toll Fraud Liability Be advised that certain security risks are inherent in the use of any telecommunications or networking equipment, including but not limited to, toll fraud, Denial of Service (DoS) attacks, loss or theft of data, and the unauthorized or illegal use of said equipment.
Service and Warranty 8 NetVanta 4660/5660 Series Copyright © 2014 ADTRAN, Inc.
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Physical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Shipping Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents 10 NetVanta 4660/5660 Series Copyright © 2013 ADTRAN, Inc.
List of Figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. NetVanta 4660/5660 Series Front Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex A . . . . . . . . . . . . . . . . . . . . . NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex B . . . . . . . . . . . . . . . . . . . . . NetVanta Octal SHDSL EFM Network Module, Annex A . . . . . . . . . . . . . . . . . . . . . . .
List of Figures 12 NetVanta 4660/5660 Series Copyright © 2014 ADTRAN, Inc.
List of Tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table A-1. Table A-2. Table A-3. Table A-4. Table A-5. Table A-6. Table A-7. Table A-8. Front Panel Status LED Behaviors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex A LED Behaviors. . . . . . . . . 24 NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex B LED Behaviors. . . . . . . . .
List of Tables 14 NetVanta 4660/5660 Series Copyright © 2014 ADTRAN, Inc.
1.
Physical Description 2. NetVanta 4660/5660 Series PHYSICAL DESCRIPTION The NetVanta 4660 is an integrated Layer 2 and Layer 3 carrier Ethernet services router providing a universal edge device supporting any mix of Layer 3 IP Virtual Private Network (VPN), Layer 2 VPN (E-LINE/E-LAN), and Internet access services.
NetVanta 4660/5660 Series Physical Description NetVanta 4660/5660 Series Domestic Shipping Contents Domestic shipments of the NetVanta 4660/5660 Series include the following items: • • • • • NetVanta 4660/5660 base unit Set of two 19-inch rack mounting brackets Set of 4 rubber mounting feet Six mounting screws Quick start guide NetVanta 4660/5660 Series International Shipping Contents International shipments of the NetVanta 4660/5660 Series include the following items: • • • • • NetVanta 4660/5660 base
Physical Description NetVanta 4660/5660 Series The GIG 0/2 through GIG 0/5 ports consist of one RJ-45 and one SFP slot for connectivity over fiber. (Use either the RJ-45 connector or the SFP slot. The fiber slot has precedence.) See Table A-3 on page 36 for the Ethernet interface pinouts. The status LEDs, are located above each interface.
NetVanta 4660/5660 Series 3.
Features and Specifications NetVanta 4660/5660 Series Management and Utilities • AOS command line interface (CLI) • ADTRAN n-Command® Managed Service Platform (MSP) • Simple Network Management Protocol version 3 (SNMPv3) • SYSLOG logging • Telnet, craft/console port, SSH, ping, trace route, NTP • TCL scripting • Policy statistics • Email alerts (SMTP) LEDs • Status • Fan • GIG 0/1 through GIG 0/5 Layer 3 Quality of Service (QoS) • Low Latency Queuing, Weighted Fair Queuing (WFQ), and Class-based WFQ • Dif
NetVanta 4660/5660 Series • • Features and Specifications Encryption: DES, 3DES, and AES Authentication Mechanisms: – XAUTH Secure ID – X.509 digital certificates – DSS Signatures – Preshared keys DSL Features • • • Variable rate bonding for the SHDSL loops Automatic failover and recovery Plug-and-play automatic line detection Ethernet Features • • • • • IEEE 802.1p priority marking IEEE 802.1d dynamic/transparent bridging IEEE 802.1Q virtual local area network (VLAN) tagging IEEE 802.
Features and Specifications NetVanta 4660/5660 Series Environment • • • • Operating Temperature without AC power supply: -25°C to 70°C (-13°F to 158°F) Operating Temperature with AC power supply: 0°C to 40°C (32°F to 104°F) Storage Temperature: -40°C to 85°C (-40°F to 185°F) Relative Humidity: Up to 95 percent, noncondensing Physical and Input Power • • • Chassis: 1U high, 19-inch or 23-inch rack mountable metal enclosure Dimensions: 1.72-inch H x 17.22-inch W x 11.
NetVanta 4660/5660 Series 4. Option Modules OPTION MODULES The NetVanta 4660/5660 Series supports several option modules designed to meet a variety of networking requirements. The option modules include plug-in network modules. Network modules are cards that plug directly into the option module slot located on the front of the base unit.
Option Modules NetVanta 4660/5660 Series Network Modules NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex A (P/N 17406368F1) The NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex A (shown in Figure 2) provides a WAN-SHDSL EFM interface. See Table A-5 on page 37 for the Quad SHDSL EFM connector pinouts. QUAD SHDSL EFM ANNEX A 1 4 2 3 Figure 2.
NetVanta 4660/5660 Series Option Modules NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex B (P/N 17406368F3) The NetVanta Carrier Ethernet Quad SHDSL EFM Module, Annex B (shown in Figure 3) provides a WAN-SHDSL EFM interface. See Table A-5 on page 37 for the Quad SHDSL EFM connector pinouts. QUAD SHDSL EFM ANNEX B 1 4 2 3 Figure 3.
Option Modules NetVanta 4660/5660 Series NetVanta Carrier Ethernet Octal SHDSL EFM Module, Annex A (P/N 17806368F1) The NetVanta Carrier Ethernet Octal SHDSL EFM Module, Annex A (shown in Figure 4) provides a WAN-SHDSL EFM interface. See Table A-6 on page 37 and Table A-7 on page 37 for the Octal SHDSL EFM connector pinouts. OCTAL SHDSL EFM ANNEX A 1 4 5 2 3 6 8 7 Figure 4.
NetVanta 4660/5660 Series Option Modules NetVanta Carrier Ethernet Octal SHDSL EFM Module, Annex B (P/N 17806368F3) The NetVanta Carrier Ethernet Octal SHDSL EFM Module, Annex B (shown in Figure 5) provides a WAN-SHDSL EFM interface. See Table A-6 on page 37 and Table A-7 on page 37 for the Octal SHDSL EFM connector pinouts. OCTAL SHDSL EFM ANNEX B 1 4 5 2 3 6 8 7 Figure 5.
Option Modules NetVanta 4660/5660 Series NetVanta Carrier Ethernet Quad VDSL2 EFM Module, Annex A (P/N 17406369F1) The NetVanta Carrier Ethernet Quad VDSL2 EFM Module, Annex A (shown in Figure 6) provides a WAN-VDSL interface. See Table A-8 on page 38 for the Quad VDSL2 connector pinouts. QUAD VDSL ANNEX A 1 2 4 3 Figure 6.
NetVanta 4660/5660 Series Option Modules NetVanta Carrier Ethernet Quad VDSL2 EFM Module, Annex B (P/N 17406369F3) The NetVanta Carrier Ethernet Quad VDSL2 EFM Module, Annex B (shown in Figure 7) provides a WAN-VDSL interface. See Table A-8 on page 38 for the Quad VDSL2 connector pinouts. QUAD VDSL ANNEX B 1 2 4 3 Figure 7.
Unit Installation 5. NetVanta 4660/5660 Series UNIT INSTALLATION The instructions and guidelines provided in this section cover hardware installation topics, such as mounting options, supplying power to the unit, and installing option cards.
NetVanta 4660/5660 Series Unit Installation Mounting Options The unit may be installed in rackmount, wallmount, or tabletop configurations. The following sections provide step-by-step instructions for rack mounting and wall mounting. Rack Mounting the NetVanta The NetVanta is a 1U-high, rack-mountable unit that can be installed in a 19-inch, 23-inch, or ETSI equipment rack. The following steps guide you in mounting the NetVanta into a rack.
Unit Installation NetVanta 4660/5660 Series Wall Mounting the NetVanta By following these instructions exactly, the NetVanta can be safely mounted on the wall. • • • To avoid damaging the unit, use only the screws included in the shipment when attaching mounting ears to the chassis. When wall mounting the NetVanta, care must be taken not to damage the power cord. Do not attach the power cord to the building surface or run it through walls, ceilings. floors, or openings in the building structure.
NetVanta 4660/5660 Series Unit Installation Connecting Ground to the Unit Connect the supplemental ground before connecting the power and signal connectors. Connect the unit to a reliable ground point using a minimum 18 AWG (0.75 mm sq.) ground wire and a UL listed closed loop connector that is suitable for the ground stud and wire size. Supplying Power to the Unit The NetVanta 4660/5660 Series connects to a 48 VDC power source. To power this unit, follow the steps below.
Unit Installation • • • NetVanta 4660/5660 Series Electronic modules can be damaged by static electrical discharge. Before handling modules, put on an antistatic discharge wrist strap to prevent damage to electrical components. Place modules in antistatic packing material when transporting or storing. When working on modules, always place them on an approved antistatic mat that is electrically grounded. Always remove power from the unit prior to removing or installing a module.
APPENDIX A. CONNECTOR PIN DEFINITIONS The following tables provide the pin assignments for the base unit and network interface modules (NIMs). Base Unit Pinouts Table A-1. CONSOLE Port Pinouts Pin Name Description 1 DCD 2 RD Receive Data (output) 3 TD Transmit Data (input) 4 DTR 5 SG 6 DSR Data Set Ready (output) 7 RTS Request to Send (input) 8 CTS Clear to Send (output) 9 — Data Carrier Detect (output) Data Terminal Ready (input) Signal Ground Unused Table A-2.
Appendix A NetVanta 4660/5660 Series Table A-3. 1000Base-T Gigabit Ethernet Port Pinouts Pin Name Description 1 TRD0+ Transmit/Receive Positive 2 TRD0- Transmit/Receive Negative 3 TRD1+ Transmit/Receive Positive 4 TRD2+ Transmit/Receive Positive 5 TRD2- Transmit/Receive Negative 6 TRD1- Transmit/Receive Negative 7 TRD3+ Transmit/Receive Positive 8 TRD3- Transmit/Receive Negative Table A-4.
NetVanta 4660/5660 Series Appendix A Network Module Pinouts Table A-5. Quad SHDSL EFM Pinouts Ports 1 and 2 Pin Name 1 T02 2 R02 3 — 4 Ports 3 and 4 Description Pin Name Loop 2 - Tip 1 T04 Loop 4 - Tip Loop 2 - Ring 2 R04 Loop 4 - Ring Unused 3 — T01 Loop 1 - Tip 4 T03 Loop 3 - Tip 5 R01 Loop 1 - Ring 5 R03 Loop 3 - Ring 6-8 — 6-8 — Unused Description Unused Unused Table A-6.
Appendix A NetVanta 4660/5660 Series Table A-8. Quad VDSL2 Pinouts 38 Pin Name Description 1, 2 — 3 Ring 4 Tip Tip lead of the 2-wire interface 5, 6 — Unused Unused Ring lead of the 2-wire interface Copyright © 2014 ADTRAN, Inc.
