Specifications

VIRTU
SECTION 1 – Communication Planning
W IRE M ANAGEMENT
60 | CANADA CONFERENCE
WIRE MANAGEMENT
Wires are channeled behind the Forza Leg and Forza Panel bases, and concealed by
design by a black PVC insert that runs the entire length of the base. The insert is 27"
long and the channel opening is approximately 1.5" x 1.25" wide.
Wires are channeled through the centre of Dais, Forza Rectangle, Forza Square,
Oblique and Verso bases to floor monuments.
In the situation where the power source is outside of the table base, it will be necessary
to pass the power supply cord underneath and into the table base. VIRTU bases are
equipped with removable panels which makes access to the interior quick and easy.
The Dais base (shown left) is the only exception. Dais bases are equipped with a small
removable access panel, but may require a mouse-hole cut in the field.
All VIRTU conference tables except open Visio are designed to accommodate wiring
channeled underneath the table top and into bases. A flexible PVC wire management
channel is provided with all multi-section tables at no charge, and mounted on-site. It
features dual channels to allow separation of fibre optic cables. Open Visio tables use
the wire management cover shown on page 27 of this Price List. All VIRTU bases have
access holes to allow this wiring to pass into or out of the bases. The channel is
flexible and allows for wiring to be easily inserted or removed at the sides.
When power is being routed through Forza Leg or Forza Panel bases, velcro wire
management straps are attached to the underside of the top to manage wiring from
Connexus
TM
modules to the floor monument. The velcro straps are supplied at no
charge.
A metal cord spooler is standard on all bases with interior cavities and provided at no
charge. The spooler provides for tidy wire management when there is an excessive
amount of cord length.
EFFECTIVE MARCH 1, 2008 A PRICE INCREASE OF 5% WILL APPLY TO ALL PRODUCTS IN THIS PRICE LIST