Specifications

CONFERENCE CANADA | 43
REPRESENTS MODULES THAT WHEN
OPENED FACE THE ENDS OF THE TABLE
REPRESENTS MODULES THAT WHEN
OPENED FACE THE SIDES OF THE TABLE
STRATFORD CONNEXUS™ LOCATIONS CHARTS
The Connexus™ Locations diagrams below show the available Connexus™ locations for only the top and base configurations shown above.
Please note that the maximum allowable Connexus™ modules per top are shown, and tops may be specified with fewer modules.
Each Connexus™ module has a code to represent its location on the table surface. To specify a Connexus™ module in a particular location,
please use the code listed above it. For specific pricing on individual Connexus™ modules please see pages 30-33.
Note: One Connexus™ module is available where two modules are shown. Please refer to location code above the drawing for single
centre location in which case the Connexus™ unit will face West if on the left end of the top, and East if on the right end of the top.
For large Connexus™ units please replace “3” in location code with “4”.
Boat
Wood Panel
T OP S TYLES B ASE S TYLES
96”
120”
&
144”
168”
&
192”
216”
&
240”
264”
&
288”
APW3
BPW3
CPE3
APW3
DPE3
BPW3
CPW3
APW3
EPE3
BPW3
DPE3CPW3
EPE3
DPE3
APW3
BQE3
APW3
BPE3
CQE3
FPE3
BPW3
CPE3
EFFECTIVE MARCH 1, 2008 A PRICE INCREASE OF 5% WILL APPLY TO ALL PRODUCTS IN THIS PRICE LIST