Specifications

GENERAL INFORMATION
Bases
All bases are shipped separately and require assembly to selected top.
Refer to the base requirements chart on pages 18–19 to select the appropriate bases and sizes for conference tops.
Round drums and rectangular conference bases require an edge profile to be specified, please select from the drawings shown in
the previous section.
Metal bases are available in a choice of chrome or black powder coat epoxy.
Finish
A five step catalyzed varnish finish that when dry has a sheen value of 32°, is applied to all cases.
Custom conference tables
Krug has extensive capabilities for customization of conference tables, including special sizes, finishes, veneers, and special
features such as ganging or mobility options. Please contact Customer Service with specific requirements and a drawing for more
information.
Seating capabilities
To establish seating capabilities, an outside chair dimension of 24′′ has been used for this price list, plus an allowance of 5′′ between
chairs, for a total of 29′′. This is an approximation only. When using another chair, particularly seating with a 5 prong caster base,
be sure to adjust the approximate seating capacity accordingly. Since not all manufacturers use this same formula, when a seating capacity
is in question, please contact Krug Customer Service to review the specific seating that is being used with Krug Conference product.
Birdseye Maple
Birdseye Maple veneer is available on 6800 Millennium conference tops at an upcharge of $50 list per square foot. Birdseye Maple
is recommended in a clear finish only. This option could extend regular lead times.
Laminate Worksurfaces
Laminate worksurfaces are available at an upcharge of 10% (a higher upcharge may apply to specially priced plastic laminates).
Where there are wood profile edges on worksurface tops, they will remain as wood profiles on laminate tops.
Krug will order and procure laminates. Purchase orders with a plastic laminate option must include:
Manufacturer’s Name
Laminate Name
Laminate Number
Krug reserves the right to decline a laminate that may not be suitable for the application. Krug assumes no responsibility for the durability,
consistent colouration or any other performance characteristic of a customer specified laminate. Laminates may extend the nor mal lead-time,
check with Customer Service for current scheduling information. Please see page 6 for laminate information.
CONFERENCE
CANADA | 13
EFFECTIVE MARCH 1, 2008 A PRICE INCREASE OF 5% WILL APPLY TO ALL PRODUCTS IN THIS PRICE LIST