Specifications

VIRTU
SECTION 3 – Installation Instructions
I NSTALLATION I NSTUCTIONS
188 | CANADA CONFERENCE
Multi-Section with Forza Legs or Panels
C
OMPONENTS T OOLS R EQUIRED
A) 3/4" Hex drive bolt (112164) 5/32" Allen Key or driver
• 16 per joint
+ (8 per Dais/Oblique)/(12 per Verso/Forza)
B) Tite-joint fastener (10637)
• 3 per joint
C) Fastener rod (11687)
D) Channel bracket
• per joint
IMPORTANT: If table has Connexus™ components, install them using their instructions before
proceeding.
P ROCEDURE
1. Unpack all table sections and bases. Find all the hardware listed. Fasteners are in a bag on the bottom
of one section and the channels are wrapped together (some fasteners may be shipped with the bases.)
MAKE SURE THE CORRECT SIZE AND QUANTITY OF COMPONENTS ARE INCLUDED WITH THE
TABLE.
2. Place table upside down onto a soft surface. Arrange top sections by the number coding on bottom of
sections.
3. For tables with four (4) or more sections refer to chart for assembly detail. Align the machining in one
section with the machining in the adjacent section. Bring the sections tight together.
Top Lengths Assembly Order
Top Before Flipping After Flipping
168 ACW3-BCW3 ACW3/BCW3-CCE3/DCE3
192 CCE3-DCE3
216 ACW3-BCW3 ACW3/BCW3-CCW3
240 DCE3-ECE3 CCW3-DCE3/ECE3
264 ACW3-BCW3 ACW3/BCW3-CCW3/DCE3
288 ECE3-FCE3 CCW3/DCE3-ECE3/FCE3
CCW3-DCE3
ACW3 FCE3DCE3 ECE3CCW3BCW3
ACW3 ECE3DCE3BCW3 CCW3
ACW3 DCE3CCE3BCW3
EFFECTIVE MARCH 1, 2008 A PRICE INCREASE OF 5% WILL APPLY TO ALL PRODUCTS IN THIS PRICE LIST