Specifications

CUSTOMER’S OWN MATERIAL - C.O.M.
Customer’s Own Material (COM)
COM must be received three weeks prior
to the acknowledged ship date. Orders
with COM not received by the required
deadline will be delayed.
A description of the fabric, including
supplier name, fabric name and colour
number must be included with the
purchase order.
When the COM fabric is received at Krug,
it must be clearly identified with the fabric
name and colour, and tagged with name of
the Krug customer and purchase order
number. Krug will inspect all COM fabric
when received to determine if it will be
suitable for upholstery. Where Krug feels
that the fabric or leather specified will
compromise the quality or integrity of our
products, customers will be contacted to
direct these concerns. Further, Krug
reserves the right to refuse to accept and
use any COM fabrics or leathers that will
compromise our products in any way that
is unacceptable to Krug. Krug cannot
assume responsibility for the durability or
tailoring quality of customer’s own
material.
Yardage specified in this price guide is
approximate. In the case of multiple
product orders, multiply the number of
items by the COM yardage specified to
determine fabric required, unless
otherwise indicated. Additional yardage
may be needed if the material is less than
54″ wide, or patterned or striped and
requires matching. As fabric is applied
horizontally, non-directional fabrics are
recommended. COM fabrics are applied as
they come off the roll unless otherwise
specified. All striped fabrics will be
applied vertically unless otherwise stated
by the customer and after approval by
Krug. It is the customer’s responsibility to
advise Krug if the upholstery is to be
applied otherwise, and to advise Krug
of any special upholstery instructions.
Special instructions should be sent to
Krug Customer Service, including a
sample (or photocopy) of the fabric.
Krug is not responsible for instructions
sent with the fabric rolls, or for the
method of upholstery if no instructions
have been provided.
COM fabrics must be specified in either
Maharam or Momentum Panel fabrics.
Krug is not responsible for determining if
a fabric is not ideal for tackboard
application. Please contact Maharam at
1-800-645-3943 or Momentum at
1-800-366-6839 directly for more
information about a specific fabric.
COM Shipping Procedures
For tackboard COM fabrics, please send
fabrics to:
Krug Inc.
111 Ahrens Street
Kitchener, Ontario
Canada N2H 4C2
Attention: RECEIVER
All packages must be clearly marked ‘‘For
Customs Clearance by Russell A. Farrow
Custom Brokers’’.
According to the North
American Free Trade Agreement (NAFTA),
goods shipped between the United States and
Canada can qualify for exemption from all
duties, or for a reduction in duties, if the
goods can be proven to originate in either the
United States, Canada or Mexico.
Canada Customs requires that a NAFTA
Certificate of Origin and a Commercial
Invoice be completed and sent with the
fabric shipment. The Commercial Invoice
must clearly state the description of the
fabric, the selling price, the make-up or
content, and the purchaser. The absence of
these two documents will delay the
shipments at the U.S./Canada border,
thereby potentially delaying the customer
order. If the total value of the shipment is
less than $1200 U.S., Customs will accept
a Low Value Statement of Origin in place
of the NAFTA Certificate of Origin. The
Low Value Statement must be signed by a
representative of the exporting company.
This statement may either be included on
the commercial invoice or attached to the
invoice.
Krug is happy to answer any questions or
concerns about COM shipping procedures
and the required documents. Please
contact our Customs Specialist at
1.888.578.5784.
CANADA | 5
EFFECTIVE MARCH 1, 2008 A PRICE INCREASE OF 5% WILL APPLY TO ALL PRODUCTS IN THIS PRICE LIST